Recently, bosses in the engineering circle are probably losing sleep over the same thing — tungsten prices have soared again and again!
Opening industry news, there are notifications of skyrocketing tungsten prices everywhere: from the beginning of 2025 to January 2026, the price of 65% grade black tungsten concentrate has surged by more than 250%, jumping from 143,000 yuan/ton to nearly 670,000 yuan/ton; the domestic price of APT (a core raw material for tungsten processing) has even risen to 990,000 yuan/ton, an increase of more than 45% from the beginning of the year.

The ones who suffer the most from this price surge are us engineering bosses. Cutting picks are “essential consumables” for tunnel, mine, and pile foundation construction — we can’t do without them for a single day. But now, when choosing cutting picks, we are caught in a dilemma with no way out:
Choose large-alloy cutting picks? Can’t afford the cost!
Everyone knows that large-alloy cutting picks are wear-resistant and impact-resistant. They can stand up to hard rock formations, eliminating the need for frequent shutdowns to replace picks, which seems to save time. However, as tungsten prices rise, the price of large-alloy cutting picks also rises sharply. The cost per pick has increased by nearly 30% compared with last year, and purchasing a batch of cutting picks will cost tens of thousands or even hundreds of thousands of yuan more.
Nowadays, engineering profits are already meager, with high labor and machinery rental costs. Coupled with the continuous rise in tungsten prices and the strong reluctance of tungsten holders to sell, prices may continue to rise in the future. Mass purchasing large-alloy cutting picks will undoubtedly add insult to injury to the already tight capital chain, making many bosses exclaim “I can’t hold on anymore!”

Choose small-alloy cutting picks? Can’t break through hard rock!
To save costs, some bosses have no choice but to switch to small-alloy cutting picks, but new problems have emerged — they work well in soft rock formations, but once encountering hard rock above F10 or granite, small-alloy cutting picks completely “fail”.
Either they can’t cut through hard rock, with the drilling rig idling for a long time and advancing less than one meter; or the alloy head is not wear-resistant enough, wearing out quickly — it becomes bald in less than one working shift. Frequent shutdowns to replace picks not only delay the construction period but also lead to higher idle costs of labor and machinery. What’s more troublesome is that some small-alloy cutting picks have substandard craftsmanship, which are prone to alloy head detachment and tooth body fracture. The more you use them, the more you lose, falling into the misunderstanding of “saving small money but losing big money”.

Is there no way to have the best of both worlds?
In fact, many engineering bosses have fallen into a cognitive misunderstanding: whether a cutting pick is useful or not has never been about the size of the alloy. The key lies in “adaptation” — adapting to your construction stratum and your equipment can save costs and improve efficiency.
The rise in tungsten prices is a general trend that is difficult to ease in the short term. Instead of struggling repeatedly between “expensive cutting picks” and “useless cutting picks”, it’s better to change your thinking: don’t compete for the size of the alloy, but compete for “construction method adaptation” — this is Malinmatt’s solution for all engineering bosses!

Malinmatt Construction Method Service: More Than Just Selling Cutting Picks, We Help You Save Costs and Solve Problems
Different from ordinary cutting pick manufacturers, Malinmatt doesn’t just sell cutting picks, but tailors hard rock construction solutions for engineering bosses. The core is to help you get out of the dilemma of “large alloy being too expensive and small alloy being ineffective”, realizing “cost reduction and efficiency improvement”.
Whether you are engaged in tunnel excavation, rotary drilling pile driving, or mine mining, whether you encounter high-hardness hard rock above F12 or complex strata with alternating soft and hard rocks, Malinmatt can accurately adapt to help you solve the problems:
1. Survey the stratum first, then determine the plan, no blind selection
Our engineers will visit your construction site to survey the stratum, analyze the rock hardness, abrasiveness and integrity, make risk predictions based on the geological survey report, and accurately match the most suitable cutting pick model and drill bit arrangement plan. This eliminates the problems of “overkill” (wasting costs) and “underpowered” (unable to break through hard rock).
You don’t have to figure out whether to choose large alloy or small alloy by yourself. We will recommend the most cost-effective combination of cutting picks according to your working conditions, so that every cutting pick is used where it is most needed.

2. Exclusive construction method optimization, efficient drilling even in hard rock
Malinmatt has been deeply engaged in hard rock construction for many years. For difficult-to-drill strata such as granite, after multiple rounds of testing and optimization, we have formed an exclusive rock entry construction method — it can not only accurately match the cutting pick with the drilling rig torque but also optimize the cutting pick installation angle and construction parameters. This allows small-alloy cutting picks to cope with medium-hard rock and large-alloy cutting picks to exert their maximum efficiency, avoiding waste.
For example, in the test of an F12 high-hardness rock tunnel, our 35-series shrink-type cutting picks, with the core advantages of automatic grinding and sharp self-repair, not only successfully completed the construction but also achieved a low loss of “average 1.5 picks per cubic meter”, exceeding the customer’s expectations, and the construction efficiency was improved by more than 30%.

3. Full follow-up and continuous optimization, visible cost reduction
Malinmatt’s service is not a “one-time deal”. After cooperation, we will adjust the construction plan in real time according to the data during the construction process, calculate the cost optimization space, and help you continuously reduce consumable costs and construction costs.
For long-term strategic cooperation customers, we also provide annual professional construction method services, regularly visit to optimize the plan, and later extend the service life of cutting picks by adding wear-resistant coatings, ensuring that every penny you spend is worthwhile.

A soaring tungsten price is not terrible; choosing the wrong method is!
Now the engineering industry is highly competitive, and every penny saved is your profit. At a time when tungsten prices are rising continuously and hard rock construction is difficult, instead of passively bearing cost pressure, it’s better to take the initiative to choose Malinmatt’s construction method service to get out of the dilemma of cutting pick selection. No need to feel distressed about “large alloy being too expensive”, no need to worry about “small alloy being unable to break through hard rock”. Malinmatt uses professional construction methods to help you handle hard rock construction, save costs, improve efficiency, and stabilize the construction period!
