Field Test of Merlinmatt S135 Roadheader Picks​

I. Test Preparation​
  1. Selection of test picks: The S135 picks were selected for this test. These picks are made of special steel and undergo vacuum brazing and heat treatment, featuring high hardness and wear resistance.​
  2. Test equipment: A roadheader was used, which has good performance and stability and can meet the test requirements.​
  3. Test location: Shanxi mining area was chosen. This mining area has complex geological conditions and high rock hardness, being representative.
II. Test Process​
  1. Installation and commissioning: The test picks were installed on the roadheader and commissioned to ensure that the picks were firmly installed and the equipment operated normally.​
  2. Tests under different geological conditions: Areas with different geological conditions in the mining area were selected for testing, including hard rock areas, soft rock areas, mixed rock areas, etc. In each area, cutting operations were carried out for different durations, and the working conditions and wear conditions of the picks were recorded.​
  3. Data collection: During the test, professional testing instruments were used to collect and analyze data such as the stress condition, temperature change and wear degree of the picks.
III. Test Results​
  1. Work efficiency: In hard rock areas, the pick has high work efficiency, being able to cut rocks quickly and improve the working efficiency of shearers or roadheaders. In soft rock areas and mixed rock areas, the work efficiency of the pick is also relatively stable, which can meet the production needs.​
  2. Wear condition: After a period of use, the wear degree of the pick is small, and the tip part still remains relatively sharp. This indicates that the pick has high wear resistance and can be used for a long time under complex geological conditions.​
  3. Stress condition: During the test, the stress condition of the pick is relatively stable, with no excessive impact force or vibration. This shows that the structural design of the pick is reasonable, which can effectively disperse the stress and improve the service life of the pick.​
  4. Temperature change: During the working process, the temperature change of the pick is small, and there is no overheating. This indicates that the pick has good heat dissipation performance, which can effectively reduce the temperature and improve the working stability of the pick.
IV. Conclusions and Recommendations​
  1. Conclusions: Through this field test, this type of pick has shown good performance under the complex geological conditions in Shanxi area. It has high working efficiency, wear resistance and stability, and can meet the usage requirements of mining machinery and equipment in Shanxi area.​
  2. Recommendations: When using picks, appropriate pick models and specifications should be selected according to different geological conditions to improve the service life and working efficiency of the picks. At the same time, the maintenance and upkeep of the picks should be strengthened. The wear condition of the picks should be checked regularly, and those with severe wear should be replaced in a timely manner.