I. Optimizing Materials and Manufacturing Processes
Selecting Special Materials
- Tooth head material: High-hardness and high-toughness cemented carbide is used as the tooth head material. For example, nano-structured cemented carbide, with its fine grains, can improve hardness and toughness. Compared with traditional cemented carbide, the wear resistance of nano-cemented carbide can be increased by 30% – 50%. At the same time, precisely control the composition ratio in the cemented carbide, such as appropriately increasing the tungsten carbide content and optimizing the cobalt content, to enhance the wear resistance and impact resistance of the tooth head.
- Tooth body material: For the tooth body, high-strength alloy structural steel, such as 42CrMoA, is selected. This kind of steel can obtain good strength and toughness after appropriate heat treatment processes like quenching and tempering. Moreover, during the processing of the tooth body material, the purity of the steel is strictly controlled, impurity elements are reduced, internal defects of the material are minimized, and the quality of the tooth body is improved.
Improving Manufacturing Processes
- Welding process: In the welding of the tooth head and the tooth body, advanced welding technologies such as vacuum brazing or high-frequency induction brazing are adopted. These welding methods can precisely control the welding temperature and time, resulting in higher quality of the welded joint. For example, vacuum brazing can reduce oxidation during welding and improve welding strength. Meanwhile, high-quality brazing materials such as silver-based brazing filler metals are selected, which have good fluidity and wettability, enabling better bonding between the tooth head and the tooth body, ensuring firm welding, and preventing the tooth head from falling off during use.
- Machining precision control: Cutting picks are manufactured using high-precision CNC machining equipment to ensure the dimensional and shape accuracy of the tooth head and tooth body. Precise dimensions can guarantee the stability of the cutting picks during installation and operation. For instance, strictly control the taper of the tooth head and the size of the mounting hole of the tooth body, so that after installation, the cutting picks can closely fit with working components such as the drum of the shearer or roadheader, reducing vibration and eccentricity during operation, thereby prolonging the service life.
II. Reasonable Surface Treatment
Coating Treatment
- Wear-resistant coating: Wear-resistant coatings such as titanium nitride (TiN) coating, chromium carbide (Cr₃C₂) coating, or diamond-like carbon coating (DLC) are applied to the surface of cutting picks. These coatings can significantly improve the wear resistance of the cutting picks. Taking TiN coating as an example, its hardness can reach about 2000HV, and it has a low friction coefficient. During cutting, the coating can reduce frictional wear between the cutting picks and the material being cut, and also prevent the material from corroding the cutting picks. The thickness of the coating is generally between 2 – 5μm; a too thin coating has poor protective effect, while a too thick one is prone to peeling.
- Anti-corrosion coating: In some working environments with humidity or corrosive media, anti-corrosion coatings such as zinc-aluminum coating are used. Zinc-aluminum coating can form a dense protective film on the surface of the cutting picks, isolating the cutting picks from external corrosive substances. When the coating is partially damaged, the zinc-aluminum coating can also protect the base material through the sacrificial anode method, preventing the cutting picks from rusting and being corroded.
Surface Strengthening Treatment
- Shot peening: The tooth body of the cutting pick is subjected to shot peening. High-speed projectiles impact the surface of the tooth body, causing certain plastic deformation on the surface and forming a layer of residual compressive stress. This compressive stress layer can improve the fatigue resistance of the tooth body. For example, when the cutting pick is subjected to periodic cutting forces, the residual compressive stress can offset part of the tensile stress, thereby delaying the initiation and propagation of cracks and prolonging the service life of the cutting pick.
III. Correct Use and Maintenance
- Reasonable Installation
When installing cutting picks, ensure that they are installed in place and the installation accuracy meets the requirements. Operate in accordance with the equipment manufacturer’s instructions and use appropriate installation tools. For example, when installing shearer cutting picks, ensure that the cutting picks are closely attached to the mounting seats on the drum. After installation, the axial and radial runout of the cutting picks should be controlled within the specified range, generally with axial runout not exceeding 1 – 2mm and radial runout not exceeding 0.5 – 1mm. This can ensure that the cutting picks are evenly stressed during operation, reducing additional wear and damage caused by improper installation. - Optimizing Working Parameters
According to the nature of the material to be cut and the performance of the equipment, reasonably adjust working parameters such as cutting speed and feed rate. For example, when cutting harder rocks, appropriately reducing the cutting speed and increasing the feed rate can reduce the impact force on the tooth head of the cutting pick, avoiding damage to the tooth head due to excessive impact. At the same time, avoid long-term overload operation of the equipment to prevent excessive wear of the cutting picks under harsh working conditions. - Regular Maintenance and Replacement Establish a regular inspection system to check the wear and installation of cutting picks. Before and after each working shift, conduct a simple visual inspection of the cutting picks to check for severe wear of the tooth head, deformation of the tooth body, loosening of the welding joint, etc. When the wear of the cutting pick reaches a certain level, such as when the tooth head wear exceeds 1/3 of the original size, the cutting pick should be replaced in time. Meanwhile, during maintenance, clean up debris and coal dust on the surface of the cutting picks to keep the working environment of the cutting picks clean, which also helps to extend their service life.