Northwest Mining Area F13-Class Hard Rock: Extreme Rock Breaking! The Field Test Performance of Hard Rock Cutting Picks Is Absolutely Stunning

In the development of deep resources in northwest mining areas, F13-class hard rock has always been a core challenge restricting mining efficiency. Taking a large coal mine in Shaanxi as an example, the roof of the main mining coal seam in this mine is a typical interbedding of F13-class sandy mudstone and quartz sandstone, featuring high rock hardness, high quartz content, strong rock integrity and prominent brittleness affected by deep ground stress. Previously, when using traditional cutting picks for comprehensive mechanized excavation, the frequency of pick replacement was extremely high, and problems such as tooth body breakage and tooth head chipping occurred frequently. The cost of pick consumption remained high, and the monthly advance of the excavation face was far lower than the planned target, seriously affecting the release of coal production capacity. However, the application of Mailinmaite 135 cutting picks has brought a breakthrough change to hard rock mining in this mining area.
​
Technical Highlights of Mailinmaite 135 Cutting Picks (Optimized for Mining Scenarios)​
1. Upgraded Impact-Resistant and Wear-Resistant Materials​
Aiming at the high-stress characteristics of deep hard rock in mining areas, the tooth body is made of high-strength wear-resistant alloy steel, which has undergone special heat treatment. Its yield strength and bending resistance have been significantly improved, enabling it to effectively resist the instantaneous impact during hard rock cutting. The tooth head adopts high-performance ultra-fine grain cemented carbide, with its composition ratio precisely controlled. While ensuring high wear resistance, it also has excellent impact toughness, significantly reducing the wear rate when facing hard rock with high quartz content.​
2. Customized Manufacturing Process for Mining Applications​
The combined process of “vacuum diffusion welding + surface carbonization treatment” is adopted, which effectively solves the problems of easy rusting of cutting picks and cracking of welding joints in the humid and dusty environment of mining areas. This process forms a stable transition layer at the bonding interface between the tooth head and the tooth body, greatly improving the bonding strength. In the continuous humid working environment of mining areas, the tooth head falling rate is far lower than the industry average. At the same time, the surface of the tooth body is sprayed with a wear-resistant coating, which significantly enhances weather resistance and can effectively resist the erosion and wear caused by mining dust and groundwater.​
3. Adaptive Design for Coal Mine Roadheaders​
In view of the operating characteristics of coal mine roadheaders, a “short and thick tooth body + wide-blade tooth tip” structure is adopted. The tooth body size ratio is optimized to avoid collision and breakage with the rock wall in the narrow comprehensive excavation space. The wide-blade tooth tip design expands the cutting contact area, which can disperse the local stress during hard rock cutting and reduce the risk of tooth tip chipping. In addition, an anti-loosening structure is added at the tail of the tooth body to adapt to the quick disassembly and assembly requirements of the roadheader’s pick holder, greatly shortening the pick replacement time and reducing the equipment downtime.
​
Practical Performance in F13-Class Hard Rock at Northwest Mining Areas​
1. Sharp Reduction in Pick Wear Loss​
In the deep F13-class hard rock excavation face of this coal mine, the average wear loss of Mailinmaite 135 cutting picks per cycle operation is significantly lower than that of traditional cutting picks. On-site inspection shows that after long-term continuous operation, the tooth tip wear of Mailinmaite 135 cutting picks is slight, while traditional cutting picks suffer severe wear under the same working conditions, and some even have tooth head chipping.​
2. Significant Extension of Service Life​
After long-term on-site testing, the average service life of Mailinmaite 135 cutting picks is much longer than that of traditional cutting picks. In the excavation of the deep transportation roadway of this mine, a set of Mailinmaite 135 cutting picks can work continuously for a longer time, and the completed excavation advance has greatly exceeded the previous record of the mining area, completely solving the problem of “frequent pick replacement and frequent shutdown of the working face”.​
3. Substantial Improvement in Mining Efficiency​
Benefiting from the high stability of the cutting picks, the effective operating time of the roadheader has increased significantly, and the equipment utilization rate has been greatly improved. At the same time, due to the reduced cutting resistance, the cutting speed of the roadheader has increased significantly. The monthly excavation advance not only meets the planned target but also achieves an excess increase. The coal production capacity release efficiency has been greatly improved, and a considerable increase in annual coal output is expected.​
4. Effective Reduction in Comprehensive Costs​
From the cost calculation perspective, although the unit price of Mailinmaite 135 cutting picks is slightly higher than that of traditional ones, the monthly purchase quantity of picks has been greatly reduced, leading to a significant decrease in procurement costs. In addition, with the reduced frequency of pick replacement, the monthly downtime for maintenance has decreased, and labor costs and equipment maintenance costs have also decreased accordingly. Comprehensive calculation shows that the monthly costs related to hard rock excavation in this mining area have been significantly saved, and the long-term economic benefits are very considerable.
​
In the F13-class hard rock mining at northwest mining areas, Mailinmaite 135 cutting picks, through customized optimization of materials, processes and structures for mining areas, perfectly adapt to the complex working conditions of high stress and strong abrasion of deep hard rock. They not only solve the industry pain points of traditional cutting picks such as “easy damage, short service life and low efficiency” but also provide reliable equipment support for the efficient development of deep resources in northwest mining areas with the core advantages of “high wear resistance, long service life and low cost”. Their application experience also provides important references for the hard rock mining upgrading of surrounding mining areas.