The coal market is ups and downs, and cost reduction and efficiency improvement have become the norm. But many people ignore a hidden cost black hole – unplanned downtime caused by failure problems such as pick wear, chipping, and tooth loss.
Today, I will help the coal mine owner figure out: How much money will he lose per hour if the pick fails and stops?
Calculation basis (we use the domestic mainstream medium-sized mines with an approved production capacity of 450,000-900,000 tons/year and the regular working conditions of intelligent fully mechanized mining working faces as the basis, excluding extreme geological and overhaul conditions):
Hourly production capacity of mining surface: 500 tons/hour (the common range of medium-sized mines is 400-600 tons, take the median value)
Comprehensive selling price of coal: 900 yuan/ton (excluding tax, take the winning price between 800 and 1,000 yuan)
Hourly fixed operating cost of working surface: 1,500 yuan/hour (including equipment depreciation, labor, and auxiliary energy consumption)
Downtime for a single pick replacement: 1-1.5 hours
Additional loss of equipment for a single shutdown: 500-800 yuan (take the median value of 650 yuan/time)

01 Direct production loss:
The shutdown resulted in a loss of 500 tons of production and a direct loss of 450,000 yuan in revenue.
Calculation formula: 500 tons/hour × 900 yuan/ton = 450,000 yuan/hour.
Losses during periods of capacity saturation cannot be made up by overtime work, and non-saturated periods will also disrupt mining continuity and increase dispatch costs.
In one sentence: if the fully mechanized mining is shut down for one hour, a high-end sedan will be directly lost.
02 Fixed operating costs:
Even if the equipment is shut down, fixed expenses will still be incurred: such as equipment depreciation, personnel salaries, auxiliary energy consumption, etc. These expenses will not be suspended with the shutdown. Calculated at 1,500 yuan/hour, if there are 10-15 downtimes per month, it will cause hundreds of thousands or even hundreds of thousands of hidden costs in a year.

03 Additional equipment losses:
Frequent replacement of picks means that the shearer drum and gear seat are repeatedly subjected to abnormal impact and wear. The single additional loss is conservatively 650 yuan. This is only the cost of direct accessories. Long-term wear and tear will greatly shorten the life of the roller, and subsequent maintenance costs are the real big factor.
04 Production plan lags behind:
Equipment downtime not only drags down the production capacity of the current shift, but also disrupts the connection of subsequent processes, increases management and coordination costs, and also poses the risk of contract breach. According to industry estimates, this kind of indirect loss is about 2%-3% of the output value of 450,000 yuan per hour, which is about 10,000 yuan per hour based on the conservative mid-range value. This value may seem high, but in fact it includes hidden costs such as loss of customer reputation caused by underproduction, contract breach penalties, idling of the coal flow system and additional dispatch.
Calculate the general ledger:

After one hour of shutdown, the actual comprehensive loss was as high as approximately 466,500 yuan:
Production loss of RMB 450,000 + fixed cost of RMB 1,500 + equipment loss of RMB 0,650 + construction period lag loss of RMB 10,000, totaling RMB 466,500. This is the conservative median calculation for medium-sized mines. If it is a large mine with a capacity of more than 1.2 million tons, or an area with high coal prices, the downtime loss in a single hour can easily exceed one million yuan.
Calculated on a full-year basis:
If the machine is shut down 12 times a month for one hour each time due to pick failure, the annual loss will be approximately 67.176 million yuan, approaching 70 million yuan. This high loss can be completely avoided by optimizing the pick.
Real case:
A medium-sized mine had an average of more than 12 shutdowns per month due to pick failure. After replacing high-wear-resistant picks suitable for its highly abrasive working conditions, the average monthly shutdowns were controlled to less than 3 times. Calculated only based on shutdown losses, the annual savings exceed 5 million yuan. Coupled with reduced drum maintenance costs and manual tooth replacement labor intensity, the comprehensive benefit far exceeds the price difference of the pick itself.

A few words of advice to coal mine management:
The coal market has its ups and downs, but the operating rate is always the basis of profits.
When choosing picks, don’t just look at the unit price, but at the comprehensive start-up cost. A cheap but frequently failing pick can save you dozens of dollars when you buy it, but one downtime will cost you four to five hundred thousand dollars. Stop one hour less and earn nearly half a million more. Choosing the right pick means preserving core earnings.
Downtime loss is not an “invisible cost”, but real money flowing through your fingers. We want to be a pick manufacturer that allows you to reduce downtime.