Do you know why some of the same type of picks can be used for half a month, while others collapse and break teeth after just a few days?
Most people’s first reaction is that the material is not good. In fact, the key is that the fatigue value of cemented carbide is not grasped. The pick head is subjected to high-frequency impact, high temperature, and erosion. Repeated alternating stress leads to the accumulation of micro-cracks, and eventually the blade falls off—that is, fatigue failure, just like muscle strain when a person does heavy work for a long time.
Today, we will dismantle the practical skills from the four dimensions of “material selection, processing, use, and operation and maintenance” to help you extend the fatigue value and maximize the cost-effectiveness of each pick.

1. Source selection
The core of pick carbide is to balance “hardness + toughness”. Choosing the right material is half the battle.
Prefer fine-grained/ultra-fine-grained materials: the smaller the grains, the more uniform they are, the denser the structure, and the stronger the fatigue resistance. For working conditions such as rotary excavation, hard rock, and semi-coal rock, ultra-fine grain (WC grain <0.5 μm) cemented carbide is used. Compared with ordinary coarse grain, the fatigue life is increased by more than 30%. However, the finer the grains are not, the better. Excessive refinement can easily lead to cracking, so it needs to be accurately matched according to the construction scene.
Precisely matched cobalt content: Cobalt serves as a binding phase, affecting toughness and hardness. For high-frequency impact working conditions (such as rotary excavation of hard soil layers and hard rock in mines), it is recommended to use medium-high cobalt materials with a cobalt content of 6%-12% to improve toughness; for low-impact working conditions (such as soft coal mining), low-cobalt materials can be selected to balance hardness and fatigue resistance.

Resolutely avoid material defects: pores, graphite inclusions, and micro-cracks will accelerate fatigue failure. Through strict flaw detection, high-density, low-porosity cemented carbide is screened to eliminate defects from the source.
2. Strictly control process details
After selecting the right material, the fatigue life will still be greatly reduced if the processing technology is not in place.
Optimize the grinding process to avoid surface damage: Use low-speed and small-feed grinding and increase polishing to reduce roughness and eliminate residual tensile stress. Compared with rough surfaces, the fatigue life can be increased by about 20%.
Matching special coating to strengthen protection: the coating blocks high-temperature erosion and slows down thermal shock and chemical corrosion. Coating temperature control is suitable for high-temperature working conditions in hard rock; anti-corrosion coating is used in humid and water-rich environments to protect the cobalt bonding phase, and the coating must be uniform and defect-free.

Standardize vacuum brazing to avoid alloy shedding: Conventional brazing has high temperatures or insufficient thermal insulation, which can easily produce micro-cracks and pores in the weld. Vacuum brazing is used, precise temperature control is used, and special brazing materials are matched to ensure that the weld is dense and the shear strength reaches the standard, and the expansion of fatigue cracks is inhibited from the source.
3. The construction party needs to use it scientifically
The premature failure of many picks is not due to poor quality, but to rapid accumulation of fatigue caused by improper adaptation to working conditions. Share 2 practical tips:
Strictly control the load and prevent overload: the greater the load, the shorter the fatigue life. Under working conditions of hard rock, hard soil, and semi-coal rock, excessive rotation speed and feed rate can easily cause high-frequency impact and induce fatigue cracks. The operating parameters need to be matched according to the material, and segmented construction is recommended for complex working conditions.

Stable control of working conditions and good cooling protection: when cutting hard materials, the instantaneous high temperature of the cutter head can reach 600-800°C, the alloy hardness drops by nearly half, and thermal stress accelerates loss; rock powder erosion and humid environment also damage the cutter head. It is necessary to ensure that the spray water path is unobstructed, the entire process is wet, and the protection against high dust and corrosion conditions is strengthened.
Avoid the impact of foreign objects and prevent hidden damage: The alloy head is highly brittle and is prone to micro-cracks when exposed to metal debris, hard gangue, etc., and will expand rapidly under subsequent stress. Before operation, clean the site of foreign objects and check the gear seat regularly. Wear or inner hole deformation will cause stress deviation and need to be replaced in time.
4. Daily inspection and operation and maintenance
Fatigue damage is a gradual process. It is recommended to detect hidden dangers in time and extend life.

Regular inspection: focus on cracks, coating damage, and abnormal wear. Stop and inspect every 5 meters of drilling in rotary excavation, every 1 meter of excavation in tunneling, and every 10 meters in coal mining; a comprehensive inspection will be conducted every 50 meters (or 50 holes). If the cutter head is worn by more than 50% or cracks appear, replace it immediately.
Standard storage: Improper storage can cause hidden damage. Place it in a dry, ventilated, non-corrosive environment to avoid moisture to ensure stable performance during use.
Conclusion: Extending the fatigue value means reducing costs and increasing efficiency.
As a pick pick manufacturer, we firmly believe that a good pick pick should not only have excellent materials and exquisite workmanship, but also let customers know how to “use it for a long time.”
If you encounter frequent chipping or broken teeth during construction, or you need to customize highly fatigue-resistant picks, please leave a message in the comment area. Mailinmat can help reduce costs and increase efficiency in all types of construction!