A must-see for construction! Teach you to identify the wear pattern of picks and identify the problem at a glance

During the construction of rotary drilling rigs, the picks are consumed quickly and replaced frequently, which is a common problem for all construction brothers.
The newly replaced picks soon became flat, chipped, and even had their handles broken. Many people blindly blamed the quality and changed brands, which not only cost them money but also delayed the construction period.
In fact, the wear pattern of the pick is a key signal. Every kind of wear indicates the problem, but you don’t understand it.
Today, Merinmate will teach you how to deal with three types of core problems based on three common wear patterns of picks, helping you avoid detours and reduce losses!

Minor premise: quickly distinguish between normal and abnormal wear and tear
Before interpretation, a simple distinction should be made: normal wear is uniform without damage, and abnormal wear (sudden decrease in life, chipping, etc.) requires focused investigation.

Key interpretation: 3types of wear patterns, hiding 3 types of problems

Observing pick wear does not require complicated measurements. Focus on the cutting edge, wear location and damage. By comparison, you can determine the problem.

1. Unilateral eccentric wear: abnormal installation or equipment
Don’t panic if there is eccentric wear on one side. Check the installation and drill pipe first. Only when the force is applied evenly can it be wear-resistant!

Wear pattern: one side is severely worn, the other side is intact, the cutting edge is tilted, and the force is obviously uneven.
Interpretation of the shape: It is mostly due to the installation angle deviation, the deformation of the gear seat or the non-vertical drill pipe, which causes the pick to be stressed on one side.
Quick response: calibrate the drill pipe, clean and replace the gear seat, and install according to standard torque to ensure flexible rotation of the pick.

2. Broken blade/broken handle: Insufficient impact resistance or improper operation
Broken blades and broken shanks are due to insufficient impact resistance, so either the picks must be replaced or the operation must be standardized!

Wear patterns: chipping of the cutting edge and fracture of the tooth body, which are common in hard rock and pebble-containing strata, and are sudden wear.
Interpretation of the shape: Either the pick has insufficient toughness, or it is forced to drill or overloaded, resulting in excessive impact.
Quick response: In hard rock conditions, the impact-resistant picks are replaced, the operation is standardized, the hard rock is broken in advance, and the drilling speed is controlled.

3. The tooth head falls off: poor welding or frequent impact
The tooth head falling off is mostly due to poor welding. Replace the pick with high-quality craftsmanship to avoid the root cause!

Wear pattern: The alloy head is separated from the tooth body and the welding joint is cracked. This is fatal wear and will be scrapped directly.
Interpretation of the shape: The core is that the welding process is poor, or the welding joint is cracked due to frequent severe impacts during operation.
Quick response: Replace the picks of vacuum welding and laser cladding processes to avoid overload operations.

Mailinmat Private Collection: 3 Tips for Interpreting Wear Patterns

1. Comparing old and new picks can accurately interpret the wear pattern and avoid misjudgment;
2. The core of the pick is adapted to the working conditions. Soft soil looks sharp, hard rock looks tough. If you choose the right pick, it will wear slowly;
3. Interpreting the wear pattern is the first step in troubleshooting wear and tear, and can improve the efficiency of troubleshooting.

Conclusion: Understand the wear pattern and spend less money.

Every wear pattern of picks indicates the root cause of the problem – selection, installation, operation or material. If you understand it, you can save money.
In the future, the picks will be consumed quickly, so don’t blame the quality first. By observing the wear pattern according to this article, you can initially judge the problem, solve it in a targeted manner, and reduce the loss.
If you are unable to make an accurate judgment or don’t know how to select a model, you can contact the Melinmate technical team for free working condition investigation and one-on-one guidance.