Breaking Through Rock Barriers! Mailinmaite Cutting Picks Empower F10-Class Hard Rock Roadway Expansion in Shaanxi Coal Mines

Deep in the Loess Plateau of northern Shaanxi, the underground roadway expansion project of a large coal mine once hit a bottleneck. As mining depth continued to extend, the mine needed to widen the original narrow 3m×3m roadway to a large 6m×5m cross-section to meet the passage requirements of intelligent mining equipment and ventilation safety standards. However, the F10-class hard rock encountered in the construction area became an insurmountable “iron wall” that hindered traditional tunneling processes.
With a Mohs hardness of over 7.5, F10-class hard rock features a dense structure and exceptional wear resistance, posing a severe test for the cutting tools of tunneling equipment. Statistics from the initial project phase showed that when using traditional cutting picks, nearly 10 picks were consumed for every meter of tunneling, with a daily consumption of up to 50 picks. Frequent shutdowns for pick replacement became the norm—taking more than 2 hours each day. This not only severely disrupted the tunneling rhythm, causing the construction progress to fall behind by 35%, but also significantly increased labor costs and equipment idleness costs. More critically, the rapid wear of traditional picks triggered chain problems such as loose pick holders and intensified vibration of the roadheader’s cutting head, posing potential safety hazards. The project thus fell into a triple predicament of “low efficiency, high cost, and high risk.”
To solve the hard rock tunneling challenge, the project team conducted extensive research and field tests, ultimately selecting Mailinmaite high-performance cutting picks as the core solution. Specifically developed for hard rock conditions, these picks precisely meet the cutting demands of F10-class hard rock through three core technological innovations: Their alloy heads are based on nano-scale tungsten carbide, innovatively added with rare metal elements such as niobium and tantalum. After high-temperature sintering at 1200℃, they not only achieve ultra-high hardness (over HV1600) but also possess excellent impact toughness, effectively resisting the severe impact during hard rock cutting. The independently developed dual-chamber vacuum welding process realizes atomic-level metallurgical bonding between the alloy head and the pick body, with weld strength 40% higher than industry standards, fundamentally solving the common problems of traditional picks such as tooth loss and edge chipping. The unique spiral groove design combined with a wedge-shaped tooth tip forms an efficient “cutting-chip removal” synergy—the wedge-shaped tip concentrates stress for rapid rock breaking, while the spiral grooves accelerate debris discharge, avoiding secondary wear caused by debris accumulation at the tip and significantly improving cutting efficiency and pick lifespan.
In practical application, Mailinmaite cutting picks demonstrated outstanding rock-breaking performance beyond expectations. After the Sany EBZ260 roadheader equipped with these picks entered the hard rock area, pick breakage and edge chipping almost disappeared, and pick holder wear was reduced by 60%. Data shows that the daily pick consumption dropped sharply from 50 to 9, a reduction of 87.5%, with the consumption per meter of tunneling falling below 1.5 picks. Meanwhile, reduced shutdowns for pick replacement doubled the roadheader’s continuous operation time, increasing the daily tunneling efficiency by 100% compared to previous levels. The delayed project progress was gradually recovered and even exceeded the milestone targets.
“Mailinmaite cutting picks not only solved our urgent problem but also brought tangible efficiency improvements,” noted the project’s technical director. He calculated: pick procurement costs decreased by over 80%, labor costs for pick replacement reduced by 70%, equipment maintenance costs dropped by 40%, and the overall comprehensive construction cost was cut by 40%. Today, the coal mine’s roadway expansion project has been successfully completed. With its stable performance in F10-class hard rock conditions, Mailinmaite cutting picks have become a “performance benchmark” in the hard rock tunneling field, providing a replicable and promotable efficient solution for similar mining projects.