Facing “Whetstone” Dilemma in Tunnel Boring? Conquer F14-Grade Hard Rock with High-Performance Bits – Project Efficiency Soars!

In the tunnel engineering field, “hard rock” has always been a major bottleneck in tunneling. When encountering F14-grade hard rock—known in the industry as “whetstone”—many construction teams are left with few solutions. Rapid wear of cutting picks, frequent replacements, and a sharp drop in tunneling efficiency not only significantly increase construction costs but also delay project schedules.

Located in a mountainous area, this tunnel project features complex geological conditions. The core tunneling section encounters typical F14-grade hard rock strata — with uniaxial compressive strength exceeding 180MPa, the rock is dense, highly abrasion-resistant, and rich in quartz, earning it the vivid nickname “whetstone” in the industry.

Cutting pick wear rate is alarming: After just 2 hours of tunneling, the picks require bulk replacement due to severe wear, with some even suffering from “tooth chipping” and “shank breakage.”

Tunneling efficiency plummets sharply: Hampered by frequent pick replacements, the efficien

cy falls far short of the project’s planned targets, leading to mounting pressure on the construction schedule.

Construction costs keep rising: Continuous procurement of new picks and substantial labor input for replacements drive costs upward.

With the project progress at a standstill, the construction party sought solutions everywhere. Eventually, upon industry recommendation, they introduced Merlinmatt’s super hard rock cutting picks—specifically developed for hard rock working conditions. After three months of practical application, Merlinmatt cutting picks have brought significant economic benefits and construction period guarantees to the tunnel project.

01 Material Upgrade

The cutting pick head adopts a large alloy, and the pick body is made of 35CrMnSiA. After special heat treatment, it boasts high hardness while maintaining excellent toughness — it can not only withstand the severe impact of hard rock but also reduce wear and significantly extend service life.

02 Structural Innovation

Targeting the problems of easy slipping and difficult penetration of “whetstone” rock, the tip angle and cutting edge curvature have been optimized. In practical application, the cutting torque of the shield machine has been reduced by 15%, and the tunneling speed has increased from less than 2 meters per day to 3.8 meters, doubling the efficiency.

03 Process Guarantee

The connection between the pick head and shank adopts high-temperature vacuum welding technology, solving the common problems of “head detachment” and “shank breakage” of traditional picks under strong impact.

In tunnel engineering, “Hard rock is not scary — what’s scary is choosing the wrong equipment.” Centered on “solving customers’ working condition challenges,” Merlinmatt has always developed customized cutting pick solutions for strata with different hardness and lithology. From tunnel projects to mining operations, we consistently deliver efficient and reliable tunneling support.