Constant Tooth Breakage in F10+ Hard Rock Tunneling? Malinmatt Cutters Win with “Toughness”

“F10+ hard rock breaks as soon as it’s excavated, and cutters break faster than progress!”
F10+ hard rock (such as high-silica granite and basalt) is a “roadblock” in mining and tunnel construction — cutters break immediately upon contact or wear out rapidly, workers spend half their time replacing cutters, construction schedules are delayed, costs soar, and project profits are directly eroded!
Stop confronting it head-on! The key to constructing in such high-hardness, high-impact rock formations is “toughness” rather than “hardness”. Choosing the right specialized tough cutters can directly reverse the situation: after an open-pit mine in Inner Mongolia switched to Malinmatt high-toughness cutters, the cutter breakage rate decreased by 80%, tunneling efficiency increased by 60%, and the cost per meter of construction was immediately reduced by 180 yuan!

Why Can’t Ordinary Cutters “Withstand” F10+ Hard Rock?

First, identify the crux: the Mohs hardness of F10+ hard rock is generally 7-9, and it often contains hard ore veins inside. The impact load generated during cutting is more than 3 times that of ordinary rock formations. Ordinary cutters will “brittle failure” when encountering it —
  • Lack of toughness: Only pursuing cutter head hardness while ignoring impact resistance, leading to breakage under load;
  • Unstable bonding: Loose welding between the cutter head and the cutter body, resulting in direct detachment under impact;
  • Stress concentration: Unreasonable tooth shape design causes all cutting force to concentrate on the tip of the cutter head, accelerating breakage.
To put it simply, it’s not that F10+ hard rock is “unbreakable”, but that you’re using “hard but brittle” ordinary cutters and failing to grasp the core of “toughness-based rock breaking”!

Why Can Malinmatt Cutters Achieve “Toughness-Based Rock Breaking”?

Developed exclusively for F10+ hard rock, with a dual-core design of “high toughness + strong wear resistance”, it fundamentally solves the problem of easy cutter breakage:
Adopting alloy cutter heads with both excellent toughness and hardness, after composite heat treatment, the impact toughness is increased by 60%, making them not easy to fracture even when facing broken rock blocks; the thickness of the wear-resistant layer is increased by 2mm, ensuring more durable cutting. It also uses imported high-strength alloy cutter heads with a hardness of 62-65 HRC, and the wear resistance is 50% higher than that of ordinary cutters. Stop confronting it head-on! The key to breaking through F10+ hard rock tunneling lies in “toughness”, and even the hardest rock formations can be “chewed through”. In terms of technology, it adopts “tenon-and-mortise” fusion welding technology, which increases the bonding strength between the cutter head and the cutter body by 40%; combined with the reinforced cutter neck design, the bending resistance is maximized to avoid breakage caused by rock block impact. In terms of design adaptation, the streamlined cutter body and wide-blade cutting head reduce rock debris jamming, disperse cutting stress at the same time, and are compatible with mainstream equipment such as shield machines and roadheaders without additional debugging.

F10+ Hard Rock Actual Combat: Data Speaks Volumes

A tunnel project in Shanxi, with F12 high-silica granite at the working face:
▶ Previously using cutters of a certain brand: 2-3 cutters broke every 3 meters of tunneling, daily tunneling progress was 6 meters, and the cost per meter was 520 yuan;
▶ After switching to Malinmatt cutters: Replacement was only needed every 22 meters of tunneling, daily tunneling progress reached 16 meters, and the cost per meter was reduced to 340 yuan.
“I used to be exhausted from changing cutters all the time; now I only need to change them at most once a day. The construction period was advanced by a full month — these cutters are really the bane of F10+ hard rock!” — On-site feedback from Project Manager Li.
Key Point: For F10+ hard rock construction, “toughness > hardness”! Only focusing on hardness when selecting cutters will only lead to a vicious cycle of “the harder, the more brittle; the more brittle, the easier to break”. Malinmatt high-toughness cutters are the key to breaking the deadlock.
Exclusive benefit for F10+ hard rock now! Malinmatt launches free rock formation testing + cutter adaptation plan services for high-impact hard rock projects to help you solve the problems of “easy cutter breakage and low efficiency”!