Difficulties encountered in the construction of granite gneiss? Cutting picks help improve efficiency.

In the field of pile foundation construction, “tough nut” geological conditions have always been a touchstone for testing equipment and consumables.
Rock Analysis
The “reinforced and iron-clad” granite gneiss with a compressive strength of 100-250 MPa belongs to the category of hard rocks. This kind of stratum has a hard structure and strong wear resistance, which puts extreme demands on the impact resistance and wear resistance of cutting picks. In conventional construction, it is common for cutting picks to wear quickly and require frequent replacement, which often becomes a “bottleneck” that slows down the construction schedule.
On-site Measurement
Under the same equipment and formation conditions, the construction data of the two groups show a distinct contrast:
  • Performance of traditional cutting picks: 25 cutting picks are consumed per pile, with a drilling cycle as long as 8 days. Frequent shutdowns for pick replacement not only interrupt the construction rhythm but also increase labor and time costs.
  • Performance of Merlinmet cutting picks: only 8 cutting picks are consumed per pile, and the drilling cycle is shortened to 5 days. The service life of the cutting picks is increased by 155%, and the construction period is directly reduced by 37.5%.
The Core of Efficiency Leap
Why are Merlinmet cutting picks more “resistant to damage”?
The key to breaking through in hard-core geology lies in process upgrades:
  1. Vacuum welding technology: It avoids problems such as air holes and cracks in traditional welding, making the combination of the pick head and the pick body firmer, and improving the impact resistance by more than 30%.
  2. High-quality alloy materials: The alloy composition is optimized for high-hardness rock formations, making the wear resistance of the pick head 50% stronger than that of conventional products, thus reducing abnormal losses.
  3. Wear-resistant ring design: A high-strength wear-resistant alloy ring is added at the connection between the pick head and the pick body, which can resist the continuous wear of the weak parts by the rock formation and delay the failure caused by excessive local wear.
  4. Adaptability design: It perfectly matches mainstream rotary drilling rigs, reducing additional wear caused by installation gaps.