Don’t Regret It Until the Cutter Head Is Damaged! 30-Second Pick Check Checklist Before Startup

For mining, tunneling and earthwork projects, non-stop operation and controllable costs are top priorities. A large part of hidden waste does not come from major overhauls, but from easily ignored picks. Many work teams only replace picks after chipping, breakage or falling off. They save inspection time, yet pay the price of unexpected shutdowns, cutter head damage and soaring consumable costs.

As a professional pick manufacturer, we have summarized a 30-second pre-start quick inspection method based on field experience. No tools required, no construction delays. Proper implementation can greatly reduce consumable consumption and failure risks.

01 Small Picks, Big Impact on Construction Costs

Picks serve as the cutting core for roadheaders, shearers and rotary drilling rigs. Their condition affects not only service life, but also triggers cascading failures:

✅ Dull & unevenly worn picks: Higher cutting resistance, increased power/fuel consumption and reduced tunneling efficiency

✅ Loose & broken picks: Scuffing of pick holders; cutter head replacement comes at a huge cost

✅ Pick loss during operation: Unplanned downtime and costly schedule delays

Cost reduction on site lies in preventive inspection. This 30-second check costs almost nothing but brings remarkable returns.

02 Four Check Items Within 30 Seconds — Easy for Teams to Master

Suitable for most roadheader, shearer and rotary drilling picks. Follow this sequence to finish inspection in 30 seconds: Check for looseness (10s) Shake the pick by hand to check for play or displacement. Slight looseness will pound the holder during continuous operation. Once the holder gets worn and deformed, repair costs far exceed the price of a new pick. Tighten promptly if loose.

Check carbide tip wear & chipping (10s) Visually inspect the hard alloy tip. Focus on eccentric wear, flat tops, chipped corners and carbide loss. Do not wait until the tip is fully worn out. Replace in time when carbide wear exceeds 1/3 or chipping occurs, to cut equipment load.

Check pick body deformation & rotation jamming (5s) Check whether the pick shank is bent or scratched, and confirm the pick can rotate freely. A non-rotating pick will suffer rapid one-sided wear and intensify machine vibration.

Check dust seals & gaskets (5s) Verify dust seals and gaskets are intact and in place. Rock dust and coal dust entering the holder cause corrosion and sticking, drastically shortening the service life of both picks and holders.

03 What Can You Save With This 30-Second Inspection?

  • Field feedback: Extend pick service life by 20%~40% and cut purchasing frequency
  • Prevent damage to pick holders and cutter heads, avoiding expensive overhauls
  • Reduce sudden mid-job shutdowns and stabilize construction schedules
  • Maintain ideal cutting performance and lower energy consumption

04 Manufacturer Tip: Inspection + Proper Selection = Dual Cost Reduction

Daily inspection is fundamental, while correct fit for working conditions matters equally. Frequent pick breakage is usually caused by mismatched grade, material and rock/coal seam conditions.

We supply impact-resistant and high-wear-resistant picks for rock and coal seams of varying hardness, compatible with roadheaders, shearers and rotary drilling rigs. We keep sharing maintenance know-how to help job sites manage consumable budgets.

Closing

Saving money on site does not mean running equipment past its safe limit. It means refined maintenance. Profit hides in construction details. Spend 30 seconds checking picks before startup every day, eliminate hidden risks in advance, maximize the performance of every pick, and achieve stable construction at lower cost.

Feel free to leave a comment if you need pick selection advice or consumable cost-reduction solutions tailored to your working conditions.