In coal mining, excavation, and pile foundation construction, the pick loss rate directly determines the construction cost and efficiency. Many construction parties only focus on materials and alloy heads, but ignore the heat treatment process.
The key reason why the wear resistance and chipping resistance of picks made of the same material are so different lies in the control of the two core processes of quenching and tempering, which directly determine the hardness and toughness of the picks.
Simply put, hardness corresponds to wear resistance, and toughness corresponds to impact resistance and fracture resistance. Quenching and tempering complement each other and accurately balance the two properties, allowing the pick to adapt to various complex and harsh working conditions.

1. Why must picks be quenched + tempered?
The raw steel without heat treatment has a loose structure and has the problem of “easy to wear when soft and easy to brittle when hard”, and cannot adapt to high-intensity impact and continuous wear conditions. The ideal state of a pick is that it is hard on the outside and tough on the inside, which not only resists friction and wear, but also buffers strong impacts and prevents them from breaking. The core value of heat treatment is to reshape the internal structure of steel through standardized processes, solve performance shortcomings, and greatly improve the stability and service life of picks.
2. Quenching: Injecting “hard” strength into the pick
Quenching is the core process that determines hardness and wear resistance. The forming pick is heated to a standard temperature to allow the internal grains to be fully refined and reorganized, and then rapidly cooled to lock in a tight metallographic structure. Standard quenching can greatly improve the surface density and overall hardness of the tooth body, making it less likely to peel and scratch during continuous cutting, maintaining sharpness for a long time, and reducing the frequency of tooth replacement. However, single quenching has shortcomings: after rapid cooling, a large amount of internal stress remains inside the steel, and the texture is relatively brittle. Although the hardness of a pick that is only quenched without tempering is sufficient, its toughness is extremely poor, and it is easy to chip or break when encountering impact or overload.
3. Tempering: giving the pick a “tough” soul

Tempering is the core supporting process to optimize toughness and eliminate hidden dangers. After quenching is completed, through low-temperature constant-temperature heating and slow cooling, the performance can be accurately optimized without destroying the original hardness. On the one hand, tempering can completely eliminate internal invisible stress, make the material more stable, and avoid later cracking and fracture problems; on the other hand, tempering can refine the grains, optimize toughness and impact resistance, effectively buffer the impact of rockfall and equipment vibration, and prevent failures such as falling pieces and chipping. Popular summary: quenching is responsible for making the picks wear-resistant, and tempering is responsible for making the picks resistant to damage.
4. Craftsmanship details determine real quality
The quality gap between picks on the market is often not due to material differences, but rather to the execution of the heat treatment process. In order to reduce costs, some manufacturers “make subtractions” in temperature control accuracy, cooling medium, tempering time and other aspects, resulting in product performance being greatly reduced. Formal standardized production always adheres to the complete process of precise quenching and constant temperature tempering to achieve a scientific ratio of hardness and toughness, making it wear-resistant and non-brittle. It can be widely adapted to the needs of coal shearers, tunnel boring machines, rotary drilling rigs and other equipment, effectively reducing construction losses and downtime costs.

Quenching determines the wear-resistant bottom line, and tempering determines the service life. Both processes are indispensable. When purchasing picks, don’t just look at the surface parameters. A reliable heat treatment process is the key to saving money in the long run. Our factory strictly controls every heat treatment process and focuses on producing high-quality picks with high wear resistance, anti-breakage, and high cost performance, adapting to the construction needs of all working conditions. If you have purchase or customization needs, please send us a private message for consultation, and we will provide you with one-on-one exclusive construction solutions!