Stop wasting your picks! The power of the coal mine tunnel boring machine is matched with the pick, which directly saves costs after reading it.

During the coal mine excavation process, many front-line masters have had this experience: They spent a high price to replace high-quality picks, and adjusted the cutting power to the maximum. They thought that the operation would double the efficiency. However, within a few days of going down the mine, not only did the picks wear out faster, the excavation progress was slower, and most importantly, a lot of costs were increased. At this time, many masters will say: “The quality of this pick is not good!” In fact, this is often a deviation in the adaptation of power and pick. Tunnel boring machines with different powers can achieve their best performance only when matched with corresponding picks.
Today, we combine practical cases and practical guides in coal mines to dismantle the matching logic of power and picks, and teach front-line teams to get rid of loss misunderstandings and achieve cost reduction and efficiency improvement.

Practical case of Melinmat hard rock excavation: incorrect matching of picks, no matter how high the power is, it will be in vain

Location: Return air lane in the south wing of a mine in Shanxi
Geology: f6.5~7.2 Dense hard rock, intercalated with thin coal seams, severe cutting impact
Equipment: EBZ-460 tunnel boring machine, cutting power 460kW, speed 48rpm

Initial working conditions: The standard picks do not match and the loss is serious
Using the original 30 alloy head standard pick, the construction data is as follows:
Footage per shift: 2.3 meters
Broken teeth per shift: 6~8 (broken edges and bent handles occur frequently)
Broken tool holders: 3 pieces/week
Cost of coal pick per ton: about 8.5 yuan
Feedback from workers: “The machine is very powerful and the teeth cannot hold it. I dare not push it hard.”
Reason: Under the high torque of 460kW, the standard pick is not strong enough and fails quickly due to overl

Optimization plan: replace heavy-duty picks, significantly improving efficiency
Switch to Melinmate 35 heavy-duty picks with alloy heads and thick handles, and the equipment parameters remain unchanged:
Footage per shift: 3.8 meters (65% improvement)
Broken teeth per shift: 1~2 (mainly normal wear and tear)
Tool holder damage: 0 pieces (no damage in two weeks)
Coal pick cost per ton: about 4.2 yuan (down 50%)
Feedback from workers: “The teeth can keep up with the strength, I can push with confidence, and the footage has been significantly improved.”

Conclusion: Only by accurately matching the power of the tunnel boring machine with the cutting pick and geology can we achieve low consumption and high efficiency, and reduce costs and improve efficiency.

Practical guide: divided power + rock hardness, precise matching, direct matching

Combined with the power of mainstream tunnel boring machines and tunnel working conditions, an accurate matching plan is compiled. The comprehensive excavation team can directly refer to:


1. Light boring machine (cutting power ≤75kW)
Adaptation scenario: f≤4 soft coal tunnel (no hard gangue, good geological conditions)
Representative models: EBZ50, EBZ75
Pick type selection: small alloy head pick type pick, recommended U135 standard type (25mm alloy head, 42CrMo tooth body), which has low cutting resistance, is suitable for light load conditions, and takes into account efficiency and economy.
2. Medium-sized tunnel boring machine (90–132kW)
Adaptation scene: f4–6 semi-coal and rock tunnel (containing a small amount of gangue, medium geological conditions)
Representative models: EBZ132, EBJ120
Pick selection: 30mm alloy head pick pick, U135 reinforced type (vacuum brazing process), with balanced impact resistance and wear resistance, and is not easy to chip or break teeth when dealing with a small amount of gangue.


3. Heavy boring machine (160–230kW)
Adaptation scene: f6–7 hard rock tunnel (harder geology, greater cutting impact)
Representative models: EBZ160, EBZ200, EBZ230
Pick type selection: Large alloy head of 35mm and above, U170 conventional type (plasma cladding strengthening), with stronger wear resistance and impact resistance, suitable for medium and high-intensity cutting conditions.
4. Super heavy boring machine (≥260kW)
Adaptable scene: f7–8 dense hard rock (only diggable rock layers, large cutting impact and high strength)
Representative models: EBZ260, EBZ315, EBZ360
Pick selection: 40mm extra-large alloy head, U170 reinforced type (coarse-grained carbide + plasma cladding, thickened shank), with strong load-bearing capacity, suitable for high-intensity continuous cutting, and reducing frequent tooth replacement.

Tip: low power, soft coal tunnel, small alloy pick teeth; medium power, half coal rock, medium alloy reinforcement; high power, hard rock tunnel, large alloy reinforcement; geological changes, parameter adjustment, naturally less loss!

Core logic: 3 matching principles, all of which are indispensabl

Melinmat vacuum welding process

Combined with the coal industry standard (MT/T 1138-2011), the core of power and pick matching is “power determines the load, geology determines the type, and the parameters match”:
Principle 1: Power determines the pick load. The greater the power, the stronger the cutting force, and the pick needs stronger impact resistance and wear resistance.
Principle 2: Geology determines pick type. Soft coal tunnels focus on efficiency, hard rock tunnels focus on wear resistance and impact resistance, and semi-coal rock tunnels need to be balanced. Different working conditions correspond to different pick tooth types and alloy head specifications.
Principle 3: Adapt the pick parameters to the power. The size of the alloy head and the material of the tooth body need to match the power and cutting speed to avoid “big material for little use” or “little material for big use”.

Summarize:

In coal mine excavation, picks are the “teeth” and power is the “strength”. Only when the two are accurately matched with the geological conditions can efficient excavation and loss reduction be truly achieved. Comparing the above power – geology – pick selection guide, selecting according to needs and scientifically matching can not only significantly reduce pick consumption, but also steadily improve the single cutting level.
Have you ever encountered the problems of fragile picks and low efficiency during excavation? Leave your machine model + rock hardness (f value) in the comment area, and I will match you with a set of cutting pick plans for free!http://www.mlmtkj.com