“Twelve picks were broken in one night, the alloy head was broken, and the tooth shank was bent – is it poor quality or wrong selection?”
Similar problems are common in rotary excavation construction sites. Behind these failures, they all point to the same core parameter: the ultimate bearing capacity of the pick.
This article analyzes the definition, influencing factors and working condition adaptation logic of ultimate bearing capacity from a technical perspective, providing a reference for pick selection and working condition matching.
1. What is the ultimate bearing capacity of picks?

On the left is the cutting pick of Merlinmate Company.
On the right is the same type of pick on the market.
The ultimate load-bearing capacity of a pick refers to its maximum load-bearing threshold without plastic deformation, fracture, or alloy shedding under static and dynamic combined stress. Different from the rated load, this value is the safety critical value and is divided into two dimensions: static and dynamic:
The static ultimate bearing capacity is the maximum load when the alloy head and shank remain intact under constant pressure in the laboratory, and is the core parameter of the factory;
The dynamic ultimate bearing capacity is a comprehensive bearing capacity that simulates actual rotary excavation conditions and superimposes impact, alternating, and torsional loads, which directly determines the pick’s resistance to failure in complex strata.
During normal construction, it is recommended that the long-term working load of the pick be controlled within the range of 60% to 75% of the ultimate bearing capacity to retain a safety margin and prevent instantaneous overload caused by sudden impact.
2. Core factors: key variables that determine the ultimate bearing capacity of the pick
The ultimate bearing capacity of the pick is determined by the three dimensions of material, process, and structure, and is also the core of the performance differences between different brands.
- Steel quality and heat treatment process

Mailinmate uses 35CrMnSi material, and through precise heat treatment processes such as vacuum welding, the tooth hardness can be stabilized at 40~45HRC while ensuring the impact toughness is not less than 49J/cm². This process perfectly balances toughness and structural strength. If improper heat treatment results in uneven internal stress distribution, the shank will easily bend or break laterally when subjected to repeated impacts for a long time, and the dynamic load limit will also be significantly reduced.
- Carbide head strength and welding bonding strength
High-density, high-flexural-strength alloys are more resistant to chipping and fragmentation. Welding defects can be eliminated by using technologies such as high-temperature vacuum brazing and gradient solder. If there are gaps or weak welds in the welding layer, stress concentration will occur when force is applied, causing the alloy head to partially break through the load-bearing limit and fall off.
- overall structural design

The alloy head transition adopts a large arc and smooth transition, which can disperse the instantaneous impact load;
The shape and wall thickness of the tooth shank need to match the size of the tooth seat and set a reasonable gradient to ensure uniform load transmission;
The overall streamlined shape can reduce the additional torsional force and keep the pick in a safe load-bearing range.
3. On-site working conditions: How to make reasonable selection based on ultimate bearing capacity
The theoretical parameters need to be combined with the actual situation on site. The strata, drilling rigs, and construction methods are different, and the ultimate bearing capacity requirements of the picks are different. Blind selection will accelerate failure.

Soft rock/soil layers have low hardness, small impact, are mainly abraded, and have moderate bearing capacity requirements. Just choose a conventional model and focus on ensuring wear resistance;
Medium hard rock/mixed strata are mixed with gravel and hard interlayers, and instantaneous impacts are frequent. Dynamic ultimate bearing capacity is the first consideration. It is necessary to choose a model with high matrix strength and strong welding reliability;
Hard rock (≥120MPa) is an extreme scenario of high extrusion, strong impact, and high torsion. Heavy-duty picks with high-standard materials, reinforced structures, and high alloys must be used to prevent fractures, chipping, and other failures.
In addition, operating parameters such as drilling angle, pick arrangement, and rotational speed will also change the actual force. Unreasonable use will still cause the load to approach or exceed the limit.
4. Daily operation and maintenance: maintain the ultimate load-bearing performance of the pick
Even if a high-capacity pick is selected, improper operation and maintenance will still lead to performance degradation. It is necessary to regularly check the wear of the tooth seat and tooth sleeve. Excessive clearance will generate additional torsional load; promptly replace the picks that have micro-deformation or micro-cracks to avoid damage and amplify the stress; maintain the stability of the drilling system of the drilling rig, reduce the vibration of the fuselage, and reduce the impact of alternating loads.
5. Conclusion

The ultimate bearing capacity of the pick is the core technical parameter throughout the entire process of product development, production, selection, and use. We are always guided by the needs of working conditions. From material formulation, heat treatment, structural design to precision welding, we control every performance indicator throughout the entire process, so that the ultimate bearing capacity of each factory pick can accurately match various complex rotary excavation construction scenarios, laying a solid hardware foundation for engineering construction.