Recently, bosses in the engineering industry have been losing sleep over the same thing — tungsten prices have soared again and again!
Opening industry news, there are only notifications of skyrocketing tungsten prices: from the beginning of 2025 to January 2026, the price of 65% grade black tungsten concentrate has surged by more than 250%, jumping from 143,000 yuan/ton to nearly 670,000 yuan/ton; the domestic price of APT (a core raw material for tungsten processing) has risen to 990,000 yuan/ton, an increase of more than 45% compared with the beginning of the year.
Engineering bosses are the ones who suffer the most from this price surge. Cutters are “indispensable consumables” for tunnel, mine, and pile foundation construction — they are needed every day. However, choosing cutters nowadays has fallen into an intractable dilemma.

Dilemma 1: Choose Large Alloy Cutters? Can’t Bear the Cost
Everyone knows that large alloy cutters are wear-resistant and impact-resistant, capable of withstanding hard rock formations without frequent shutdowns for replacement, which seems to save time. But with the rise in tungsten prices, the price of large alloy cutters has also risen sharply — the cost per unit has increased by nearly 30% compared with last year. Purchasing a batch of cutters will cost tens of thousands or even hundreds of thousands of yuan more.
Currently, engineering profits are already meager, with labor and machinery rental costs remaining high. Coupled with the continuous rise in tungsten prices and the reluctance of ore holders to sell, prices may continue to rise in the future. Mass purchasing will undoubtedly add insult to injury to the already tight capital chain, and many bosses exclaim, “We can’t hold on!”

Dilemma 2: Choose Small Alloy Cutters? Can’t Penetrate Hard Rock
To save costs, some bosses have no choice but to switch to small alloy cutters, but new problems follow: they can handle soft rock formations, but once encountering hard rock above F10 grade or granite, small alloy cutters completely “fail”.
Either they can’t cut through hard rock, with the drilling rig idling for half a day and advancing less than one meter; or the alloy head has poor wear resistance, wearing down within one work shift. Frequent shutdowns for cutter replacement not only delay the construction period but also push up labor and machinery idle costs. What’s more troublesome is that some small alloy cutters have substandard craftsmanship, which are prone to alloy head detachment and tooth body fracture, falling into the misunderstanding of “saving small money but losing big money”.

Key to Breaking the Dilemma: Abandon Misconceptions, Adaptation is the Core
Is there no way to have the best of both worlds? In fact, many engineering bosses have fallen into a misunderstanding: the effectiveness of a cutter does not depend on the size of the alloy, but on “adaptation” — adapting to the construction stratum and equipment can save costs and improve efficiency.
The rise in tungsten prices is an irreversible trend that is difficult to alleviate in the short term. Instead of struggling between “expensive cutters” and “useless cutters”, it’s better to change the mindset: don’t compete for alloy size, but for “construction method adaptation” — this is the solution that Maimai Mait offers to all engineering bosses!

More Than Selling Cutters, We Understand How to Help You Save Costs
Different from ordinary cutter manufacturers, Maimai Mait does not only sell cutters but also provides customized hard rock construction solutions for engineering bosses. Our core goal is to help you get out of the dilemma of “large alloy cutters being too expensive and small ones being ineffective”, achieving “lower costs and higher efficiency”.
Whether you are engaged in tunnel excavation, rotary drilling, or mine mining, whether you encounter hard rock above F12 grade or complex alternating soft and hard strata, Maimai Mait can accurately adapt and solve your construction problems:
1. Survey the Stratum First, Then Formulate the Plan — Reject Blind Selection
Our engineers will conduct on-site surveys of your construction stratum, analyze rock hardness, abrasiveness, and integrity, make risk predictions based on geological survey reports, and accurately match the most suitable cutter model and drill bit arrangement plan. This eliminates the problems of “overusing large cutters” (wasting costs) and “underusing small cutters” (unable to penetrate hard rock). You don’t have to worry about choosing — we will recommend cost-effective cutter combinations according to your working conditions, ensuring every cutter is used effectively.
2. Custom Construction Method Optimization — Efficient Drilling Even in Hard Rock
With years of experience in hard rock construction, Maimai Mait has developed an exclusive rock penetration method through multiple rounds of testing and optimization for difficult-to-drill strata such as granite. It not only accurately matches the cutter with the drilling rig torque but also optimizes the cutter installation angle and construction parameters, enabling small alloy cutters to handle medium-hard rock and large alloy cutters to exert maximum efficiency. For example, in the test of F12 high-hardness rock tunnels, our 35-series shrink-type cutters, with the core advantages of automatic grinding and sharp self-repair, not only completed the construction smoothly but also achieved a low loss of “1.5 cutters per cubic meter on average”, exceeding customer expectations and improving construction efficiency by more than 30%.
3. Full-Process Follow-Up and Optimization — Visible Cost Reduction
Our service is by no means a “one-time deal”. After cooperation, we will adjust the construction plan in real time based on construction data, calculate the cost optimization space, and continuously reduce consumable and construction costs. For long-term strategic cooperation customers, we also provide annual professional construction method services, conduct regular on-site optimization, and can further extend the service life of cutters by adding wear-resistant coatings, ensuring every penny you spend is worthwhile.

Choose the Right Method, Fear No Tungsten Price Surge
A surge in tungsten prices is not terrible — choosing the wrong method is! Currently, the engineering industry is highly competitive, and every penny saved is your profit. With the continuous rise in tungsten prices and the difficulty of hard rock construction, instead of passively bearing cost pressure, it’s better to take the initiative to choose Maimai Mait’s construction method services and get out of the dilemma of cutter selection. No more worrying about “large alloy cutters being too expensive” or “small alloy cutters being unable to penetrate hard rock”. Maimai Mait uses professional construction methods to help you tackle hard rock construction, save costs, improve efficiency, and stabilize the construction period!