When to replace worn picks? Mailinmat accurate answers + high-quality solutions.

In coal mining, tunnel excavation and other operations, picks directly determine construction efficiency and cost. Many teams are confused as to when is the best time to replace the pick after wear: premature replacement wastes material, while delaying it can easily cause equipment failure, reduce efficiency and even cause safety hazards. Mailinmat Technology (Xiamen) Co., Ltd. combines industry standards and practical experience to define the “golden window” for replacement and provide root solutions.

一. Accurate Judgment: Three Core Basis for the Best Time to Replace Pick Picks
1. Based on the degree of wear: follow industry standards and grasp the quantitative threshold
According to MT/T246 standards and practices, if the pick wear reaches the following indicators, it must be replaced immediately:
– Tooth tip wear: If the alloy cutter head wear exceeds 50% of the original protrusion length or ≥5mm, replace it immediately;
– Quality loss: 150g of poor quality will be scrapped directly; 100-150g will be seriously worn and replaced after this shift;
– Structural damage: If there are penetration cracks, tooth bending >2°, etc., stop the machine immediately and replace it to prevent it from falling off;
2. Based on equipment signals: pay attention to abnormal changes in operating parameters
– Abnormal current load: increased current and large load fluctuations, need to be checked and replaced;
– Abnormal vibration and noise: Intensified vibration and abnormal noise require shutdown for investigation;
– Speed efficiency decreases: footage decreases by more than 30%, replace after other problems are eliminated;
3. According to the working status: it can be quickly judged whether the pick is “disabled”:
– Poor coal and rock crushing: uneven lumpiness, excessive powder, and blunt picks that need to be replaced;
– Abnormality of the tunnel surface: smooth without streaks and high resistance, stop the machine immediately and replace it;
– Safety hazards: The pick is loose and the alloy head falls off, please replace it immediately;

二. Be wary of the four major hazards of delaying replacement. The gain outweighs the loss.
1. Sudden drop in efficiency: cutting efficiency is less than 50%, and construction schedule is delayed;
2. Rising costs: Energy consumption surges, component wear accelerates, and maintenance costs increase;
3. Equipment failure: It can easily lead to serious accidents and long downtime;
4. Safety risks: Coal dust exceeds the standard and can easily cause personnel accidents;

三. Select the right pick: Melinmate is deeply involved in hard rock excavation, and uses core technology to create “automatic grinding, failure prevention, long life” picks, which has won the trust of the industry.

1. Core technology breakthrough: automatic grinding + tip self-repair, extending effective life
Mailinmate’s shrink-type picks are equipped with automatic grinding technology, which can self-repair into a pointed shape to maintain efficient rock breaking; the lightweight design reduces “tooth throwing” failures and improves the safety and continuity of operations.
2. Adaptation to all working conditions: dual optimization of materials + processes, wear resistance and impact resistance
Mailinmate picks use ultra-high carbide tooth heads + vacuum heat treatment to balance hardness and toughness and are suitable for all working conditions; the service life in harsh scenes exceeds the industry average, and the wear-resistant coating can withstand an additional 10mm of wear.
3. Customized services: Mailinmate provides customized services for working conditions to accurately match pick parameters. The efficiency of the southwest vanadium mine project doubled and the cost dropped significantly; the loss of the F12 hard rock tunnel was ≤2 tubes/cubic, exceeding expectations.
4. Quality verified by actual combat: Mailinmat cutting picks have been verified under multiple working conditions, and their stable performance has been well received. In the future, we will continue to innovate and expand specification coverage.
四. Summary: Accurate replacement + high-quality picks to maximize benefits.

Pick replacement needs to be accurately judged based on the degree of wear and cannot be delayed. Choosing Mailinmat picks can extend the replacement cycle and reduce costs. We will help you dig efficiently and safely!