In the cut pick industry with fierce homogeneity and competition, Melinmate has always adhered to one principle: no matter how the application scenarios are switched, quality standards will never be compromised. From material selection to process polishing, from rigorous inspection to actual combat verification, every pick has been tempered to provide equally reliable quality assurance to engineering teams under different working conditions.
Material strength: consistent quality

The consistency of quality begins with the “careful selection” of raw materials. Merinmate refuses to lower material standards due to differences in scenarios. The core materials adopt industry-high-quality configurations to lay a solid foundation for performance of the pick:
• Tooth body material: Instead of ordinary carbon steel, 35CrMnSi alloy steel with excellent hardenability is selected as the tooth body base material. After professional heat treatment, this material can achieve a perfect balance of strength, hardness and toughness, and can easily withstand the violent impact of coal mining excavation, the complex load of rotary excavation operations, and even the high-frequency wear of highway teeth during continuous operations.
• Alloy cutter head: Uniformly adopts straight cylindrical tungsten-cobalt alloy cutter head, matched with high-quality carbide material. The straight column alloy structure is more stable and the welding fit is higher, which can ensure the high hardness and sharpness of the cutting end. Whether it is cutting coal seams, grinding hard rock or milling asphalt, it can maintain stable cutting performance.
Strict process standards: homogeneous quality

Good materials require good craftsmanship. Melinmate adopts a unified process system. Whether it is a large excavation pick or a small highway cutter, it undergoes the same precision processing process.
01
Vacuum brazing process: eliminate the risk of shedding: the core welding link adopts vacuum brazing technology. In a high vacuum environment, the brazing material evenly fills the connection gap between the tooth body and the straight column alloy cutter head to achieve a metallurgical-grade solid bond. This process can effectively avoid the problems of false welding and cracks caused by traditional welding, ensuring that the pick head is always firmly fixed under high-intensity impact conditions and the shedding rate is close to zero.
Vacuum heat treatment process: balance strength and toughness: vacuum heat treatment is carried out uniformly after welding, and the tooth grains are refined and internal residual stress is reduced by accurately controlling the heating rate, holding time and cooling rate. The picks treated by this process have a perfect balance of strength and toughness, and are not easy to break even in hard rock impact environments.
03
Special coating process: Extend the life of all scenes: Wear-resistant coating treatment is uniformly added to address the wear pain points of different scenes. First, the surface of the pick is finely polished and cleaned, and then wear-resistant and anti-corrosion materials are deposited to form a protective coating with high hardness and low friction coefficient. It can not only reduce losses caused by coal and rock friction, hard rock impact, and asphalt grinding, but also isolate corrosive media, greatly extending the service life of picks in various scenarios.
Zero tolerance for inspection: strict inspection of all indicators

If craftsmanship is the “foundation” of quality, then strict inspection is the “bottom line” of quality. Melinmate has established a unified inspection system for the whole process. Regardless of the pick model or application scenario, all inspection standards are completely consistent to ensure that every factory product meets high standards:
Core performance hard indicators: ① Hardness testing: Tooth hardness must meet industry standards. ② Impact energy test: All picks must pass an impact energy test greater than 49J to simulate extreme working conditions to verify their impact resistance. Products that do not meet the standards are directly rejected.
Full-process inspection: From raw material warehousing inspection, to dimensional accuracy measurement and welding strength inspection during the production process, to finished product appearance inspection and wear resistance testing, multiple processes are checked at all levels.

Choosing Mailinmat means choosing stability and peace of mind.
In the current situation of “different scenarios and different standards” in the cutting pick industry, Melinmate has always adhered to the original intention of “consistent quality” – not relaxing requirements because of small size, and not lowering standards because of special working conditions. From the careful selection of raw materials, to the excellence of vacuum brazing and heat treatment, to the rigorous inspection of all indicators, every step is only to provide customers with more reliable and durable pick products.