Mailinmate’s precise breakthrough: Overcoming the problem of pick shedding and eccentric wear in the gangue layer/fault geology, and escorting efficient mining

In mining and tunneling operations, complex geology such as gangue layers and faults have become the “hardest hit areas” for pick failure due to characteristics such as variable lithology, uneven stress, and frequent impacts. Among them, the problems of alloy tooth head shedding and eccentric wear of picks are particularly prominent, which not only leads to scrapping of picks in a short period of time and increases the cost of shutdown and gear replacement, but also causes safety hazards due to equipment load fluctuations, seriously restricting the progress of the project. In response to the core problems of this industry, Mailinmate has been deeply engaged in the research and development of complex geological conditions. Through systematic innovation in materials, processes and structures, it has created customized solutions. After practical verification in many places, it has successfully solved the pain points and injected stable power into complex geological mining operations.

Targeted deep exploration of pain points, research and development directly hit the core crux

After more than a thousand times of gangue layer and fault working condition simulations and field surveys, the Melinmate technical team found that the pick loss in this type of geology is caused by insufficient welding strength and impact stress concentration, while eccentric wear is caused by uneven cutting stress, tooth posture deviation and insufficient wear resistance. Based on this core understanding, the team conducted targeted research and development from the three dimensions of technology, structure, and materials to build a pick performance system specific to complex geology.
Process innovation: Build a solid defense line for tooth head connection in impact environments
In view of the problem that picks in the gangue layer/fault frequently encounter irregular impacts and easily cause the tooth head to fall off, Melinmate abandoned the shortcomings of traditional welding processes and independently developed dual-chamber vacuum brazing technology to strictly control the oxygen content of the welding environment below 0.001% to achieve atomic-level metallurgical bonding of the tooth head and tooth body. By accurately controlling the heating rate, holding time and cooling rhythm, the solder fills the connection gaps evenly, and the measured weld strength reaches 1800MPa, far exceeding the industry standard, eliminating the potential risks of false welding and cracks from the root. At the same time, a gradient composite structure design is introduced to make the hardness of the transition area between the alloy head and the tooth body change stepwise, which can effectively disperse the instantaneous stress caused by fault impact. Even under complex working conditions of alternating cutting of gangue and soft rock, it can avoid tooth head cracking and falling off caused by stress concentration.
Structural and material upgrades: curbing uneven wear from the source
In order to solve the problem of eccentric pick wear caused by uneven stress on the gangue layer/fault, Melinmate adopts a two-wheel drive strategy of “structural optimization + material strengthening”. Structurally, the innovative design of the shrink-type automatic grinding pick optimizes the tooth tip angle and cutting edge curvature, and is paired with a stepped positioning structure to control the installation deviation within 0.5°, ensuring that the pick is evenly stressed when the gun head rotates, and automatically repairs the cutting posture, completely changing the problem of excessive unilateral wear of traditional picks due to posture deviation; at the same time, the lightweight tooth structure reduces the pressure on the circlip, reduces the oscillation of the pick under irregular impacts, and further curbs uneven wear.
In terms of materials, the tooth head uses nanoscale tungsten carbide as the base, adds niobium, tantalum and other rare metal elements, and is sintered at a high temperature of 1600°C to form dispersed carbide particles. The hardness exceeds HRA92 while maintaining 8% fracture toughness. The wear rate is 60% lower than that of traditional alloy heads. It can handle the high-frequency grinding of gangue with ease; the tooth body is made of 35CrMnSi alloy steel with excellent hardenability, which is vacuum heat treated to achieve a precise balance of strength, hardness and toughness. It is equipped with a deep-penetration wear-resistant coating to enhance the wear and corrosion resistance, and is suitable for harsh operating environments with complex geology.
Actual combat empowers complex geology, and examples bear witness to hard-core results
The technological breakthroughs in the laboratory will eventually need to be verified in actual combat with complex geology such as gangue layers and faults. Mailinmat’s customized cutting picks have been successfully used in many mining projects across the country, and have delivered efficient and stable answers to different types of complex geological conditions.
Case 1: Gangue layer excavation project in a coal mine in Shanxi
The excavation section of the coal mine contains a large amount of quartzite gangue with uneven thickness, and is locally accompanied by small faults, with frequent alternations of soft and hard lithology. Traditional picks cannot withstand the impact of gangue inclusions and uneven stress. On average, the tooth head will fall off and the unilateral eccentric wear exceeds 3mm within 3 hours of operation. The machine needs to be shut down 2-3 times a day to change teeth. Each tooth change takes 1.5 hours. The average daily excavation efficiency is less than 1.2 meters. The average monthly consumption of picks exceeds 800 pieces. The overall cost remains high.
After the introduction of Mailinmat’s customized picks, the double-chamber vacuum brazing process ensures that the tooth head will not fall off under impact conditions, and the automatic grinding structure and precise positioning design can effectively avoid eccentric wear. After two months of practical application, the service life of a single pick has been extended to 48 hours, the number of tooth changes per day has been reduced to less than one time, the time of a single tooth change has been shortened to 40 minutes, the excavation efficiency has increased to an average of 2.3 meters per day, the average monthly pick consumption has dropped to 320, the comprehensive operating cost has been reduced by 45%, and the mining dilemma caused by the gangue layer has been completely eliminated.
Case 2: Mining project in a fault-intensive area of ​​a vanadium mine in southwest China
The vanadium mine area has developed faults and irregular distribution of granite inclusions. The picks need to frequently deal with fault impact and gangue grinding. Traditional picks consume 2.5 for every 1 meter of tunneling. The tooth heads fall off and are eccentrically worn, causing abnormal equipment load. There are many hidden dangers of boring machine jamming, which seriously affects the safety and progress of the operation.
Mailinmat’s technical team conducted in-depth exploration of the mining area, optimized the pick cutting angle and coating thickness based on fault spacing, gangue particle size and other parameters, and provided exclusive customized solutions. After application, the shedding rate of the pick head dropped to zero, the eccentric wear phenomenon was fundamentally improved, the consumption of picks per meter was reduced to less than 1 piece, the equipment load fluctuation range was reduced from ±15% to ±3%, the operational stability was significantly improved, and the average monthly mining efficiency increased by 30%, achieving the triple benefits of safe, efficient, and low-cost operations.
Empowering with technology to protect the safety of complex geological mining
Mining problems with complex geology such as gangue layers and faults are essentially the ultimate test of pick performance and adaptability. Melinmate has always focused on customer working conditions needs and rejected the “universal” product thinking. Through on-site investigation, precise analysis, and closed-loop services of customized research and development, it has deeply cultivated the technology upgrade of complex geological cutting picks. From the continuous improvement of vacuum brazing process to the innovative breakthrough of automatic grinding structure, every technological upgrade accurately corresponds to the industry’s pain points, and every performance improvement is dedicated to creating actual value for customers.
In the future, Mailinmate will continue to focus on the needs of complex geological mining, continue to deepen the research and development of anti-impact and anti-eccentric wear technology for picks, and use more hard-core technology, more reliable products, and more professional services to break efficiency bottlenecks for the mining industry, protect operational safety, and work with customers to achieve high-quality development.