——Reconstructing hard rock operation standards with patented technology, an efficiency revolution in the 3.2 billion pick pick market
The size of the domestic tunnel boring machine pick market has reached 3.2 billion yuan, and the problem of pick failure under hard rock conditions continues to eat into industry profits: in F10 and above hard rock operations, 20-30 ordinary picks need to be replaced every 8 hours, the incidence rate of broken handles and head collapse exceeds 70%, the annual consumable cost of a single project has increased by one million, and the downtime of more than 2 hours per shift for tooth replacement has led to a 40% reduction in monthly tunneling footage, and an average annual increase in equipment maintenance costs of 300,000 yuan. In response to this core pain point, Mailinmat Technology (Xiamen) Co., Ltd. relies on patented technology and practical verification to launch a series of impact-resistant picks specially designed for hard rock, completely ending the industry dilemma of “frequent tooth replacement, low efficiency, and high cost”.

1. The truth about hard rock loss: the cost black hole behind failed picks
Most construction companies are trapped in the vicious cycle of “frequent tooth replacement”. The core crux is:
- Direct economic loss: Under F14 grade hard rock working conditions, the unit price of ordinary picks is 800 yuan, and 23 picks are replaced per shift, which means a loss of 18,400 yuan. The annual consumables cost is as high as 6 million yuan, and the monthly loss due to shutdown delay exceeds 400,000 yuan;
- Core of technical failure: Mailinmat jointly analyzed more than 3,000 failed picks with industry organizations and found that 90% of scraps were caused by “toughness imbalance” under impact load – the instantaneous impact energy of F12-F15 hard rock reached 3-5 times of normal working conditions, ordinary tooth bodies were unable to absorb energy, resulting in broken shanks, and insufficient weld strength caused cracking;
- Cognitive misunderstanding solved: The core requirement of hard rock operations is the balance of “wear resistance on the outside and toughness on the inside”, rather than the pure pursuit of hardness. This is the core of the research and development of Melinmate impact-resistant picks.

2. Patent blessing + triple hard-core technology to create hard rock “diamond teeth”
Relying on the patented technology authorized in 2024 (patent number: CN308952831S), Mailinmat has created a “material-structure-process” full-chain innovation system:
- High-toughness material combination: The tooth body is cold-forged from 42CrMo alloy steel and undergoes precise quenching and tempering treatment, with a tensile strength of 1200MPa and an impact energy of 80J (30% higher than the industry); the alloy head is made of ultra-coarse-grained tungsten carbide material, with a fracture toughness increased by 40%, and F15 grade hard rock can be operated continuously for 300 hours without cracking.
- Patented structural design: Finite element simulation optimizes the head angle and thickened shank to achieve even distribution of impact energy; the wide shoulder protection structure reduces lateral force, and the 0.05mm precise gap is suitable for mainstream tunnel boring machines such as Sany, XCMG, and Taiyuan Coal Research Institute, with an adaptation rate of 98%.
- Precision brazing process: vacuum high-temperature brazing with customized solder, the weld filling degree is more than 98%, the shear strength exceeds 350MPa (far exceeding the industry standard of 187MPa), and after ultrasonic non-destructive testing, it can achieve “lifetime non-desoldering” in extreme environments.

3. Practical data: actual records of consumption reduction and efficiency increase in hard rock working conditions
Under extreme working conditions, Melinmat’s impact-resistant picks delivered outstanding results:
- Henan F14 grade limestone coal mine: adapted to Sany EBZ260 tunnel boring machine. Originally, 23 tunnel boring machines were replaced per shift, and the monthly footage was 180 meters; after replacement, the loss per shift was ≤5, and the monthly footage was increased to 320 meters. The annual consumables were saved by 1.56 million yuan, and the equipment maintenance cost was reduced by 30%;
- Yunnan F12 hard rock tunnel: The service life of the picks is 3.8 times that of ordinary products, the downtime for tooth replacement is reduced by 85%, the construction efficiency is increased by 78%, and the project is completed 2 months ahead of schedule;
- Guizhou high-stress sandstone mining area: Solve the problem of soft and hard cross-layer fractures, operate continuously for 1,200 hours without failure, and become the exclusive purchasing brand for customers.
The core value is confirmed: the cost of consumables is reduced by 70%, the operating efficiency is increased by 60%, and the equipment loss is reduced by 30%.

4. “One mine, one pick” customized service: full process guarantee
To break the limitations of general-purpose picks, Merinmate launches a customized service system:
- On-site investigation: detect rock parameters and tunnel boring machine data, and build an exclusive working condition model;
- Exclusive research and development: targeted adjustment of material ratio and structural design;
- Fast delivery: priority production and delivery within 7-15 days, with supporting installation training;
- Lifelong after-sales service: Establish a usage database and provide free maintenance guidance and on-site inspection.

Conclusion: Choose Merinmate and lock in “certain returns”
The core of hard rock excavation is the competition between efficiency and cost. With patented technology as the core, actual combat data as the support, and customized services as the guarantee, Mailinmate allows hard rock operations to say goodbye to the anxiety of “broken handles and head collapse”. If you are troubled by high loss and low efficiency, please contact us to get free working condition detection and solutions, and unlock the password to reduce consumption and increase efficiency!
Patent certification: Excavation design patent for boring machine pick
(patent number: CN308952831S)